Rotary Hammer Factory · Taizhou, Zhejiang, China
YOWEL
Service Planning · Spare Parts

Rotary Hammer Spare Parts Guide: What Distributors Should Stock

Last updated: 17 November 2026 · Reading time: 9 min · Written by the YOWEL factory engineering team, ZHEJIANG YOUWEI TOOLS CO.,LTD. (Taizhou, Zhejiang, China)

Rotary hammer spare parts are the replaceable sub-assemblies behind the tool: carbon brushes and holders on brushed models, switches, SDS-Plus chucks, gearboxes, pistons and housings. The eight DC21V cordless models are brushless and stock chargers, battery packs and chucks instead. Stock wear items first; YOWEL issues part numbers per model.

Red-background 3D exploded view of the YOWEL SDS-Plus rotary hammer platform, laying out the motor, gearbox, piston and striker, switch, chuck, housing and rear handle as separate serviceable sub-assemblies.
Illustrative platform drawing: the assemblies behind a rotary hammer spare-parts list. Part numbers are issued per model, not published on this page.

Quick answer

1. Why spare parts decide the second order

Importers rarely lose a customer because of the first drill. They lose one because a tool sits in a drawer for three weeks waiting for a switch. Spare-parts planning is therefore not an after-sales topic; it belongs in the same conversation as capacity, voltage and carton quantity.

The real cost of a tool off service

A contractor who cannot bill a tool for a week buys another brand next time. A distributor who promised a two-day turnaround and cannot deliver it loses the shop account, not just the repair. The parts that cause most of that damage are unglamorous: brushes, switches, chucks and plugs. None of them appears on the spec sheet, and all of them are cheaper to hold in advance than to air-freight later.

What the 1% allowance actually is

Our business-terms sheet records 1% free spare parts with an order. That is a parts allowance in proportion to order quantity, not a repair promise and not a warranty percentage. It is written into the order documents together with the rest of the commercial terms, so the figure is not left to an email thread. The exact parts in the allowance follow the model and the order.

Confirmed termWhat it means for a distributorWhat it does not mean
1% free spare partsParts allowance supplied in proportion to the ordered quantity.A repair guarantee, a cash discount, or a fixed list of parts for every model.
30-day rolling bufferWe hold stock for active OEM SKUs, including gear sets, chucks, switches, carbon brushes and motor assemblies.A promise that every discontinued or custom SKU is stocked forever.
48-hour dispatchParts from the Taizhou warehouse leave within 48 hours.Delivery to your port in 48 hours; freight time still applies.

Terms from the confirmed YOWEL business-terms sheet and the published service and support page. For the commercial side of the same conversation, see what importers actually pay for.

2. One platform, eight serviceable assemblies

All nineteen YOWEL rotary hammers use the SDS-Plus interface. Under the housing they follow the same service logic: a motor, a switch, a gearbox, a piston-and-striker mechanism, a chuck and a set of housing parts. That is why a platform exploded view and a model-specific parts list describe the same machine from two sides.

Motor and brushes: corded is not cordless

The corded range uses a brush motor: the armature, stator and carbon brushes are the parts a service counter knows best. The eight DC21V cordless models are brushless — a factory-confirmed point added to our 21V range page — so there are no brushes to service on those tools. Keep the two stock lists separate; sending a brush set for a brushless tool is a common and avoidable mistake. The RH2601 800W model is representative of the corded platform, and the LRH2601 of the brushless cordless one.

Gearbox, piston and striker

The gear set and bearings transmit motor rotation; the piston-and-striker set generates the impact energy printed on the spec sheet. These are lower-turnover assemblies than brushes, and they are usually replaced as matched sets rather than one piece at a time. We do not publish tooth counts, bearing codes or grease grades — those belong to the model documentation issued with the parts list.

Chuck, switch and housing

The SDS-Plus chuck, sleeve and retaining ring are supplied as one set. Switch assemblies include the housing and, on variable-speed models, the speed-control dial. Housing parts follow the colour of the order: standard finish, or the OEM colour approved for that run. All three are visible wear or damage points, which is why they sit near the top of a service counter's list.

Sub-assemblyWhat buyers ask forHow it is supplied
Motor assemblyarmature, stator, field coil, motorMatched rotor-and-stator set on corded models; brushless motor unit on the DC21V range.
Carbon brushes & holderscarbon brush, brush set, brush holderCorded models only; grade and dimensions confirmed per model on request.
Switch assemblytrigger, on/off switch, speed dialWith switch housing; variable-speed models include the speed-control dial.
SDS-Plus chuck & sleevechuck, drill sleeve, chuck sleeveChuck, sleeve and retaining ring as one set.
Gearbox & bearingsgear set, bearing, crankIndividual gears or a complete gearbox, per the model list.
Piston and strikerpiston, striker, hammer mechanismMatched piston-and-striker set.
Housing & handlemotor housing, rear handle, coverStandard or OEM-approved colour.
Bits & chiselsSDS-Plus drill bits, chisel, drill bit setConsumables, ordered with the tools or separately.

3. What to stock first, and what to leave in the buffer

Stock decisions should follow the SKUs you sell, not the whole catalogue. A distributor whose volume is 26 mm corded needs a very different drawer from one supplying brushless cordless tools to electricians.

Fast movers

Carbon brushes and holders, switch assemblies, SDS-Plus chucks and the housing parts of your best-selling SKUs. These are the parts that fail, get lost or get damaged in normal service, and they are inexpensive enough to justify shelf space at the moment the first container lands. If most of your volume sits in one class, plan from that page: the 26mm rotary hammer range is the usual starting point for trade-channel service stock.

Slow movers

Gear sets, motor assemblies and piston-and-striker sets. They matter when they are needed, but they turn slowly. Our 30-day rolling buffer covers active OEM SKUs for exactly this reason: the parts exist without every distributor having to finance a complete gearbox inventory.

Cordless-specific stock

For the DC21V platform, replace brush sets on your list with chargers, battery packs and chucks. Battery capacity is published as 4.0Ah; runtime per charge and charge time are not published, so do not let a stock list imply a figure we have not released. The charger keeps the same EU, BS or OEM plug options as the corded range.

Operation profileStock on your shelfCover from the factory buffer
Corded trade channel, 26mm volumeBrushes, switches, chucks, plugs and cables, housings.Gear sets, armatures, piston-and-striker sets.
Professional / 28mm channelChucks, switches, housings, brushes.Heavier gearbox assemblies and motor units.
DC21V cordless channelChucks, chargers, battery packs, switches.Brushless motor units and internal assemblies. No brushes.

4. Wear indicators worth checking before a claim

Most warranty conversations become quicker when the tool comes in with a clear description of what was observed. None of the checks below requires a published service interval; they are inspection prompts, not maintenance schedules.

Brushes, chuck and cable

On brush motors, short brushes and a rough commutator explain loss of power and sparking. A chuck that no longer grips cleanly often has a worn sleeve rather than a failed mechanism. On corded tools, inspect the cable entry and the plug moulding before blaming the motor — the 2 m cable and EU, BS or OEM plug are service items in their own right.

Noise and heat

A change in gear noise or a tool that stops cycling cleanly when hot is worth recording in words before shipping the tool: when it happens, in which mode, and after roughly how long. Send that description with the model number. We do not publish regreasing intervals, grease specification or a brush-change schedule, so do not let a third-party interval be quoted as a YOWEL recommendation.

ObservationParts usually involvedWhat to send us
Loss of power, visible sparking (corded)Carbon brushes, commutator, motor assembly.Model number, quantity affected, mode in use.
Bit slipping or not seatingChuck, sleeve, retaining ring, bit shank.Model number and whether SDS-Plus bits from other sources were used.
No response from triggerSwitch assembly, cable and plug.Model number, voltage version and plug type.
Changed gear noise or rough runningGearbox, bearings, hammer mechanism.Model number and a written description of when the sound appears.

5. How to order the correct part

The fastest route is deliberately low-tech: identify the machine, name the assembly and state the quantity. Photographs help, but a model number is what links your request to the correct list.

Send the model, not a nickname

Names in catalogue folders are navigation labels, not measurements — the same caution we apply in our capacity selection guide. Quote the model printed on the tool and the voltage version. If you are not sure which SKU you hold, start from the product range and match the specification row before ordering parts.

What comes back

Our service team returns the model-specific list and drawing with the part names, and confirms whether the item is a shelf part or a buffer item. Part numbers are deliberately not published on the website: they vary by model and by configuration, and a generic number is worse than no number.

Buffer and dispatch

For active OEM SKUs, the 30-day rolling buffer and 48-hour dispatch from Taizhou apply. Add freight time for your destination and state whether the parts ship with the next container or by express courier. If your market relies on the SDS-Plus bit system, include bits and chisels on the same request — they can be ordered independently.

6. Where field service stops

Brush replacement, chuck sets and switch assemblies are straightforward for a competent service counter. Opening a sealed gearbox or hammer mechanism is not a job for a guess.

Grease and sealed parts

We do not publish grease grade, quantity or regreasing interval. Using an arbitrary grease in a sealed mechanism can cause more damage than the original fault. Treat the gearbox and hammer mechanism as assemblies to be replaced by a qualified service centre using the correct parts.

Claims and documentation

Put the parts allowance, claim-handling deadlines, freight responsibility for warranty parts and technical response times into the order documents. The same applies to the rest of the commercial package. When the terms are written down once, every later conversation starts from the same page.

7. Five questions we hear about rotary hammer spare parts

Where can I find the carbon brush size for my model?

We do not publish carbon-brush dimensions on the website. Send the model number and we confirm the grade and dimensions for that SKU with the parts list. Quoting a generic brush size from another brand is not a safe substitute.

Do the cordless models need brushes?

No. The DC21V cordless range is brushless, so there are no carbon brushes to stock or replace. Their service list is chargers, battery packs, chucks and switches.

Can I order drill bits and chisels without ordering tools?

Yes. Bits and chisels can be ordered independently of a tool order. All nineteen models use SDS-Plus, so specify the shank system and the diameters you need.

What does "1% free spare parts" cover?

It is a parts allowance in proportion to the order quantity, recorded in the business terms. It is not a repair promise or a fixed list for every model; the parts for your SKU are confirmed in the order documents.

How quickly can you send spare parts?

For active OEM SKUs, parts drawn from our 30-day Taizhou buffer are dispatched within 48 hours. Transit time to your country is additional, so tell us whether you need express shipping or the next container.

8. What we deliberately do not publish

Numbers that vary by model

Part numbers, drawings and model-specific lists are issued per model rather than printed on a public page. The same is true of brush dimensions, bearing codes and tooth counts. Publishing one number for nineteen SDS-Plus tools would be misleading.

Intervals we have not released

Regreasing intervals, service schedules, runtime per charge and charge time are not published. Where this guide describes inspection, it describes what to look for — never a YOWEL maintenance interval. Our service and support page carries the platform exploded view, and our team can attach the model-specific list to your enquiry.

About the data. Product facts come from the approved YOWEL parameter sheet: nineteen SDS-Plus models, eleven corded and eight DC21V cordless; the cordless range is brushless and rated 4.0Ah. Commercial terms come from the separate confirmed business-terms sheet (1% free spare parts, 30-day rolling buffer, 48-hour dispatch from Taizhou, MOQ 500 pcs, 5 pcs per carton, 35–40 days, FOB / CFR / CIF, T/T or L/C, HS 84672100). Factory facts: 20+ years, 30,000 m², 200 staff, 4 lines, 600,000 units annual capacity. SDS-Plus interface descriptions are industry-standard general knowledge; the inspection prompts are general field practice, not YOWEL test results. Part numbers, per-model lists, brush dimensions, grease grades, service intervals and charge/runtime figures are not published. No price, customer case, search volume or compliance conclusion is asserted. Confirm every part against your model before ordering.

Last reviewed on 17 November 2026 by the YOWEL factory engineering team · ZHEJIANG YOUWEI TOOLS CO.,LTD. · No.85 Taojiang Road, Qiansuo Industrial Zone, Jiaojiang District, Taizhou, Zhejiang, China · [email protected] · +86 178 1658 8178